reverendalc wrote: the board number is usually embossed on the PCB... not on a sticker. it will be on the visible side of the MLB when you remove the bottom lid
Embossed on the upper right corner, under the silkscreen etched on the PCB:
NYKS
34V-0
NM13
424T
21B
I kept the formatting as close as I could. Is this one you're looking for?
Remove the SSD / flash and the board number should be under there. If not there then look by the RF shield the number will be right under the your speaker wire plugs into on the MLB. Umm, you need to look at the solder mask, man. You need a good light and a magnifier would not go amiss. Below is what you are looking for:
If it's a 13" 2013 or 2014 it will be an 820-3437
If it's a 13" 2015 it will be 820-00165
If it's a 11.6" 2013 it will be 820-3435 (which is next to the CPU)
If it's a 13" 2012 it will be 820-3209 (which is by the RF shield)..... So on
The jiz looking shit on the boards is flux from rework. I got a shitload of board here so if I can be of any help with a read or whatever...
You know that the 3437 boards will not turn on right away. It will go like this...
Fan spin, fan stop.
Fan spin, fan stop.
Fan spin, wait for it...... screen on, chime.
If that does not happen unplug battery, apply the MagSafe, hold down alt+cmd+P+R together. Watch the fan go 1, 2 ,3 times spin. Hold the key combo for a good while... Like 45 sec or so, maybe longer. Eventually you will have your screen kick in. If no screen kicky iny then get an optical mouse and plug to USB. Look at the light on the bottom of the mouse. Does it light up red?
reverendalc wrote: I'm sure you've tried an SMC reset.
Have you tried cleaning the ME in that dump I uploaded?
Also, I've got so many threads I'm on, I can't recall... have you tried flashing back the original dump?
If so, did it power on?
Sorry, thanks
I cannot clean the ME region because the blog you referred to had dead links, fount the software to detect it, but it was buggy, couldn't make it to work. I tried to flash back the original dump, still nothing, also not sure if the original dump was read correctly. Tried SMC reset, no dice.
Firmware: Intel ME
Version: 9.5.3.1526
Release: Production
Type: Region, Extracted
FD: Locked
SKU: 1.5MB Apple Mac
VCN: 2
PV: Yes
Date: 10/05/2013
FITC Ver: 9.5.3.1526
Platform: Mobile
Latest: No
This is the output from the bin uploaded by reverenalc, the same exact output as from my original dump. Now the question is, from that list with clean ME regions, which one should I choose, because there is no exact match.
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.
You have declined cookies. This decision can be reversed.
You have allowed cookies to be placed on your computer. This decision can be reversed.
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.