Help for adapter EFI DESTROYER L Kadentech adapter

I bought it in March of this year with only 2 adapters that are 4.0.2 and 4.0.3. so far I had never required 4.0.1, but yesterday I got a macbook air A1370 that requires the 4.0.1 adapter I do not have. But before I used the kit of EFI removes from KADENTECH and my question is the following you can use the adapter of KADENTECH with the EFI DESTROYER LITE.

I leave a few photos of the KADENTECH adapter, if anyone can help me with cable configuration and the 3.3v jumper, waiting for your help and comments.

I have already seen what these adapters and they only bring 6 connections and e KADENTECH uses 8 I leave the corresponding photos for someone to tell me if the configuration is good, without further waiting for your comments

Here the cable configuration of the KADENTECH adapter you use.
1.-CS
2.-SO
3.-3.3V “ link 3-7-8 for the 3.3v”
4.-GND
5.-SI
6.-SCLK
7.-3.3V “ link 3-7-8 for the 3.3v”
8.- 3.3V“ link 3-7-8 for the 3.3v”


I still do not test, for this reason I ask for your help for the configuration

Tanks and waitting.

Thanks CygnusX1
Here the photos of how to arm it, I put the photos for comments and your help before doing the tests. Thank you

Tanks
Tomorrow try and send info

One last question, is the voltage of 3.3V.
Is offline

Battery = offline
megasafe = offline

And Im Sorry for my bad English