MBPR 13 inch Late 2013 issues

let's try this instead

plug in your efidL, and manually (with a small wire, paperclip, etc) jump from the black arrow to the bottom 1, 2, and 3 (one at a time).

does the LED light up at all?

Yes the LED lights up for all 3

It sounds like your efidL is in good physical health, but brain dead.

The odds of the self destruct function are increasing (-:

Do you have the arduino sdk and teensyduino plugin installed?

Ha! Well looks like I goofed it then.

I do not but can do so.

great. well, download and install the arduino sdk, then install the teensyduino plugin

try to load this brute force sketch (attached)


it will obviously erase the destroyer programming, but since it's not working anyway, we can use this to test the teensy itself.

there are instructions for loading the code on my tutorial here:
ghostlyhaks.com/forum/password-cracking/570-tutorial-for-brute-forcing-modern-macs#4250

it won't activate the LED, but we've already confirmed it works.

let me know how that plays out, then we can get together for a reprogram of the destroyer

Cool! I got it to work, it started writing 0007, 008 etc in my text editor

As I suspected!

Please provide the serial no of the teensy so I can verify the unit!

Nice! Note sure how to find it, on the chip is ctdx1612B

open terminal and type "ls /dev/" and you should see the device name in there.. should have serial in it...

2079100?

What time zone are you in?

EST

Ok I'm PST.

Email
If he can't fit you in, I will, but it'll have to be after 9pm your time (-: