programer chips ==>bus pirate rev3.0


Rendering Error in layout Widget/Social: Call to a member function exists() on null. Please enable debug mode for more information.
More
3 years 8 months ago - 3 years 8 months ago #1811 by zingilingiling
Hi
I do not speak English too, so I use google translation.

Thank you for the site, there are plenty of good thing to know and know.

for MacBook air 13 inch A1466 emc 2559 Mid 2012 820-3209-A .

I'm buying a pirate bus (rev3.0) and a chip programmer.

My problem is that I do not know how all wired.

I try to do something but I have tested as a response ===> "There Is not chip in the socket"

Here are some photos


"""""en français """""
salut
je ne parle pas trop anglais , donc j'utilise google traduction .

Merci pour le site , il y a plein de bonne chose à savoir et connaitre .

J'ai fais l'achat d'un bus pirate (rev3.0) et un programmeur de puces .

Mon probleme c'est que je ne connais pas la façon de cablé l'ensemble .

J'ai essayer de faire quelque testes mais j'ai comme réponse ===> " there is not chip in the socket "

Voici quelque photo


le macbook air est une version A1466









Attachments:
Last edit: 3 years 8 months ago by zingilingiling.

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1813 by CygnusX1
I had the exact same programmer and never had any luck with it. If you get it working please let me know!

If I helped you buy me a latte!

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1814 by zingilingiling
I'm at the same level as you.

If I have information, I would table them here.

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1815 by zenelli
I have this programmer to, it would be grate if it worked, ITS easyer then a raspberry
maybe its a power problem to the chip

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1817 by zingilingiling
how to connect cables to the colored pirate interface (rev3.0).

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1819 by zingilingiling
who has already encounter this problem?

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1946 by lolito
I have a similar programmer from ebay, not this Sofi but the TL866. It can read chips and erase chips. Well, read them if they are disconnected from the logic board. The ones soldered can't read them properly, and can't write them fully, it gets stuck at 20-30% all the time.

I tried downloading the latest version of the software, updated the programmer firmware... tried different usb cables... when connecting the logic board to energy, it works better, but still not properly unfortunately. I' gonna have to buy a rasperry pi i think...

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1948 by zenelli

lolito wrote: I have a similar programmer from ebay, not this Sofi but the TL866. It can read chips and erase chips. Well, read them if they are disconnected from the logic board. The ones soldered can't read them properly, and can't write them fully, it gets stuck at 20-30% all the time.

I tried downloading the latest version of the software, updated the programmer firmware... tried different usb cables... when connecting the logic board to energy, it works better, but still not properly unfortunately. I' gonna have to buy a rasperry pi i think...


With mac you working on and wich brand chip is it?
The following user(s) said Thank You: lolito

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1949 by lolito
Macmini 5.1
Mid2011
A1347
Core i5-2.3Ghz
EMC 2442

the chip is recognised by the programmer software. This is the chip:


Attachments:

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1954 by zenelli

lolito wrote: Macmini 5.1
Mid2011
A1347
Core i5-2.3Ghz
EMC 2442

the chip is recognised by the programmer software. This is the chip:





Try this,
remove the logicboard from its shell
attache the powercable, power on the mac wait about 1 minute (write protect will disable)
then shut down the mac but let the powercable attached.
then attached the soic clip and try to program
The following user(s) said Thank You: lolito, LatinMcG

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1955 by lolito
Hey man, you saved my life!!!!!!! Your tip worked like a charm!!

Problem was that this mac mini, I fucked up the efi already, with a non sucessfull re-programming that was interrupted, so now the machine was powering on by itself, just connecting the electricity plug. So I was trying to reprogram with the machine connected and also on!! I turned it off pressing the button a few seconds, led went off finally, connected the clip, erase, program, test the machine, and it worked!!!! I did 2 pram reset in the first test already, just in case.

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #1962 by zenelli

lolito wrote: Hey man, you saved my life!!!!!!! Your tip worked like a charm!!

Problem was that this mac mini, I fucked up the efi already, with a non sucessfull re-programming that was interrupted, so now the machine was powering on by itself, just connecting the electricity plug. So I was trying to reprogram with the machine connected and also on!! I turned it off pressing the button a few seconds, led went off finally, connected the clip, erase, program, test the machine, and it worked!!!! I did 2 pram reset in the first test already, just in case.


I'm glad it worked for you :)

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago - 3 years 2 months ago #3374 by zingilingiling
English:
HI
I succeeded has to unsolderchip with a station of hot air.








I made a small assembly with cables and battery of 3V.







I read the chip) with programer, how to delete(eliminate) the password.
How to verify backup ?


Francais:
salut
J'ai réussi a dessouder la puce grâce a une station d'air chaud .
J'ai fait un petit montage avec des cables et une pile de 3V .
J'ai lu la puce avec un programmer , comment supprimer le mot de passe .
Comment vérifier la sauve garde ?
Attachments:
Last edit: 3 years 2 months ago by zingilingiling. Reason: erreur

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago - 3 years 2 months ago #3375 by zingilingiling
My backup with password :

File Attachment:

File Name: sauvegarde...word.zip
File Size:4,819 KB
Attachments:
Last edit: 3 years 2 months ago by zingilingiling.

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #3376 by therealjayvi
Thank you so much for the advice on how to actually make use of the Sofi!!!! I've had this thing for months and the best I could use it for was a couple of Windows laptops! I've tried using it on a pretty decent handful of MacBooks and I always have come up with the same error saying something about the voltage being an issue. Of course, searching online for any type of help for this exact model has proven futile with every attempt, especially trying to use the manufacturers website since the majority of it is in an entirely different language... Please correct me if I'm wrong, the steps to follow in order to get the Sofi SP8 to work correctly are: remove logic board, connect power, turn on for 1 minute, turn off and keep power connected, attempt chip modifications? I would really like to be able to use this programmer because the interface is pretty easy to use but with that continuous error I've long since switched to using a Raspberry Pi.

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #3378 by zingilingiling
Yes, this is right
The following user(s) said Thank You: stankovich

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #3384 by zingilingiling
which can remove me dump my password ?

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #3388 by thaGH05T
Here you go...

File Attachment:

File Name: fixed(2).zip
File Size:4,826 KB
Attachments:
The following user(s) said Thank You: zingilingiling

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago - 3 years 2 months ago #3407 by zingilingiling
Hello ,
I solder the chip at start everything goes well .
But now the MacBook wonder a pin code .


Attachments:
Last edit: 3 years 2 months ago by zingilingiling.

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #3409 by zingilingiling
I found the solution , simply turn off the MACBOOK AIR .
Then you must turn on the MAC and press : Commande (⌘), Option, P et R


wait for the mac Rebout several times (3 times)

Please Log in or Create an account to join the conversation.

Who's Online

We have 174 guests and no members online

N00BZ

  • lovejoy
  • Leo112
  • sanath-peiris
  • michel-emil-eskander
  • rdbradl

Cookies