hi all. i was attempting to dump/clean/flash my EFI with my bus pirate, but i was getting errors reading the chip. due to lack of support, i got a raspberry pi, but i have no experience with it.
i've installed raspbain jesse and updated everything
followed flashrom install guide
created harness to SOIC clip following diagram, sharing 3v3 with vcc, wp, and cs.
i'm running:
sudo flashrom -r ~/efi/dump1.bin -V -p linux_spi:dev=/dev/spidev0.0 -c MX25L6406E/MX25L6408E
it's returning:
blah blah blah
Found Macronix flash chip etc..
Chip status register: 0x00
status register write disable is not set
bp0,1,2,3 is not set
WEL is not set
WIP is not set
This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip
Reading flash...
Error: opening file "~/efi/dump1.bin" failed: No such file or directory
FAILED
i've tried w/ and w/o battery connected.
i get one bright flash from the ACT led, then a slow dim continuous blink until it fails.
shouldn't flashrom be able to create the dump file?